簡要描述:LEOCH理士蓄電池DJM系列閥控密封式鉛酸蓄電池符合如下標準:1、JIS C 8707-1992陰極吸收式密封固定型鉛酸蓄電池標準2、JB/T 8451-96中華人民共和國機械行業標準3、YD/T 799-2002中華人民共和國通信行業標準4、DL/T 637-1997中華人民共和國電力行業標準
詳細介紹
品牌 | 理士 | 供貨周期 | 現貨 |
---|---|---|---|
主要用途 | 機房、銀行、證券 | 應用領域 | 環保,石油,能源,電子,電氣 |
理士蓄電池放電安全節能技術
通信后備理士蓄電池是通信網絡(luò )供電不間斷的重要保障,是整個通信電源設備供電保障,保證通信網絡(luò )正常運行的最后一道防線。根據蓄電池特性和維護要求,放電容量測試工作。本文論述了當前兩種蓄電池放電容量測試技術的利弊,提供了一種創(chuàng )新性的全在線蓄電池放電安全節能技術,為解決業界幾十年來蓄電池放電測試的安全隱患問題進行有益的探索。
1、當前電池放電技術分析
1.1離線式放電法技術分析
(1)將其中一組脫離系統后,一旦市電中斷,系統備用電池供電時間明顯縮短,何況此時尚不清楚另一組在線電池是否存在質量問題,此放電方式事故風
險性高。如要用此方式放電,建議提前啟用發動機組,并確保發電機組、開關電源等設備能正常運行,保證安全;
(2)離線放電結束后的電池組與在線電池組間存在較大電壓差,若操作不當將引起開關電源和在線電池組對離線放電后的電池組進行大電流充電,產生巨大火花,易
發生安全事故。用此方式放電,需要配備一臺整組智能充電機,對該離線電池組先充電恢復后再并聯回系統,以解決打火花問題,這樣將使系統更長時間處于單組
供電狀態,事故風險高。另通過調整整流器輸出與被放電的電池組電壓相等后進行恢復連接。上述操作一定要謹慎操作;
(3)此放電方式操作時既要脫離電池組的正極,又要脫離電池組的負極,尤其是脫離電池組負極時需要特別小心,操作不當引起負極短路,將造成系統供電中斷,導
致通信事故的發生;
(4)此方式是將電池通過假負載以熱量形式消耗,浪費電能,影響機房設備運行環境,需要維護人員時刻守護以免高溫引發事故。
產品咨詢
歡迎您添加我們的微信了解更多信息
電話
掃碼加微信